Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802SEC] PAR comments for 802.15.4t and 802.15.4u

Bob

I have no comments on the 802.15.3d PAR.

My comments for the other 802.15 PARs are:

802.15.4t

PAR

 5.2.b - The scope does not specify a target range for the resulting
 standard.  Is it 1 m, 1 km, 1 lightyear?  Please specify a target
 range with numerical distance target.

CSD

 1.1.1 - Adding a new PHY mode will likley require defining new
 managed objects (i.e., PIB entries) to control the use of the PHY.
 Modify a) to say: "While no new managed objects are anticipated, any
 managed objects that are required will be defined as part of the
 project."

802.15.4u
PAR

 5.2.b - The scope does not specify a target range or data rate for
 the resulting standard.  Is the range 1 m, 1 km, 1 lightyear?  Is the
 data rate 1 kb/s or 10 Gb/s?  Please specify a target range with
 numerical distance target and target data rates with numerical
 values.

CSD

 1.1.1 - Adding a new PHY mode will likley require defining new
 managed objects (i.e., PIB entries) to control the use of the PHY.
 Modify a) to say: "While no new managed objects are anticipated, any
 managed objects that are required will be defined as part of the
 project."

 Editorial: 1.2.1 a) and 1.2.3, use a space between 867 and MHz.

James Gilb

----------
This email is sent from the 802 Executive Committee email reflector.  This list is maintained by Listserv.