Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802SEC] IEEE Std 802.3-2015/Cor 1 (IEEE 802.3ce)



David

Item 4.3: I believe this date, but you will have fewer NesCom comments if you make the time 6 months, so I would suggest the group put 3/2017 as the RevCom submittal date.

Item 5.6: I think "SmartGrid" should be "smart grid" (I suppose you can capitalize it if it make the WG happy. You know what they say, happy WG, happy life.)

James Gilb

On 03/15/2016 04:46 AM, Law, David wrote:
Dear EC members,

In support of subclause 10.2 'IEEE 802 LMSC Approval' of the LMSC Operations Manual, based on its '48 hour' rule provision, and the concurrence of the sponsor chair as required, please find below the required information in respect to the IEEE Std 802.3-2015/Cor 1 (IEEE 802.3ce) Standard for Ethernet - Corrigendum 1: Multilane timestamping.

Best regards,
   David

[1] Draft PAR and CSD responses:

Draft PAR: Please see file <P802_3_2015_Cor_1_PAR_150316.pdf> attached.
CSD responses: Not required.

[2] Explanatory technical background material:

IEEE Std 802.3-2015 does not define which lane of the MDI should be used as the timing reference point in a multilane PHY. Due to this the entire inter-lane skew may need to be accounted for in the receive minimum and receive maximum path data delay register values, impacting upon the timing accuracy that can be supported.

[3] Status of the development of the PAR:

The draft PAR is pending IEEE 802.3 Working Group approval at its closing plenary Thursday.

----------
This email is sent from the 802 Executive Committee email reflector.  This list is maintained by Listserv.


----------
This email is sent from the 802 Executive Committee email reflector.  This list is maintained by Listserv.