Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802SEC] +++ 10-day EC Motion +++ Approval of new IEEE 802 Policies and Procedures

I vote approve,
Jon Rosdahl                             Engineer, Senior Staff
IEEE 802 Executive Secretary   Qualcomm Technologies, Inc.
office: 801-492-4023                  10871 North 5750 West
cell:   801-376-6435                   Highland, UT 84003

A Job is only necessary to eat!

A Family is necessary to be happy!!

On Thu, Feb 25, 2021 at 1:38 AM James P. K. Gilb <> wrote:

The LMSC Chair has authorized me to run the following ballot:

This motion is brought under Clause 10.0 “Revision of Sponsor P&P” of
the IEEE 802 LMSC P&P.

Moved: Approve document ec-20-0124-05-00EC as the IEEE 802 LMSC Policies
and Procedures and forward the document to AudCom for consideration and
IEEE SASB approval.  The First Vice Chair is empowered to provide
explanations to AudCom regarding the submission.

NOTE: The immediate result of the motion does not bring into effect a
change in the approved IEEE 802 LMSC P&P, but may cause the change if
SASB approves the unmodified document.

Moved: Gilb
Second: D'Ambrosia

This is an early close ballot.  We have 6 officers, 7 voting WG/TAG
chairs.  13 voting members, 2/3 approval is 9 affirmative votes

Background: AudCom reviewers have reviewed this draft and it should be
able to pass SASB approval.

10.0 Revision of Sponsor P&P

Revisions to these P&P shall be submitted to the Sponsor no less than 30
days in advance of a motion (or conclusion of an electronic ballot) to
approve them. Amendments in response to comments on the P&P are
permitted. Insufficient time to consider complex amendments is a valid
reason to vote disapprove. A motion to revise the Sponsor P&P shall
require a vote of approve by at least two thirds of all voting members
of the Sponsor.

James Gilb

This email is sent from the 802 Executive Committee email reflector.  This list is maintained by Listserv.

To unsubscribe from the STDS-802-SEC list, click the following link: