New Connector drawings

["Bob Davis" <bobd@xxxxxxxx>]

UPAMD,

 

Attached is the newest connector model proposal for the small connector. This uses the Yokowo proposed pin that is slightly smaller at 2mm diameter. It is tentatively rated at 10A to still give a safety factor if one of the redundant pins fails to make contact.  This pin is also has lower spring pressure at the nominal compression of 1N vs ~1.2N for the Mill-Max.

 

Please look on the connector page http://grouper.ieee.org/groups/msc/upamd/connect/  of the website for this connector, the Singatron proposal in the Singatron directory, and the drawings for the current HP/Dell circular connectors.

 

There is a comparison spread sheet that does not currently include the Singatron proposal.

 

Respectfully;

 

Bob Davis

Chair UPAMD/P1823

bobd@xxxxxxxx

408.353.5990 desk

408.857.1273 cell

bob.davis.scsi.com Skype

 

 

Attachment: target single com 2mm spacing.PDF
Description: Adobe PDF document

Attachment: yokowo pin.EASM
Description: Binary data

Attachment: yokowo target.PDF
Description: Adobe PDF document