Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: [SCC20TDS] SCC20 TII/TAD October Working Group Meeting Announcement



 

Further to the meeting announcement

The meetings rooms will be

Location - Meet in the lobby of Building C in the Mopac Campus.
Address - 11500 N. Mopac Expwy. Austin, TX  78759

 

If you are planning to attend please send the following information to Anand Jain (National Instruments) (see CC line above)

Name

Company affiliation

 

Regards

chris


 

Notice!
 
The SCC-20 TII/TAD Working Group Meeting
October 19th – 21st 2011
National Instrument Conference Rooms
Austin
Texas
 

The purpose is to advance the draft full use standards ready for submission as full standards for ballot inline with their current working candidate schemas.

 

Some breaking changes are being proposed for the following

·        Test Configuration (1671.4)

·        UUT Description (1671.3)

·        Test Description (1671.1)

 

Additional non-breaking changes are being incorporated for

Test Adaptor (1671.5)

Test Station (1671.6)

Instrument Description (1671.2)

 

In addition Instrument Description is removing the Synthetic Instrument Annexes (although the XML templates will remain as examples). These Synthetic Instruments are being grouped into there own new standard P1871.1 “Recommended Practice for Using IEEE 1671.2 Instrument Description Templates for Describing Synthetic Instrumentation for Classes of Instruments Such as Waveform Generators, Digitizers, External Oscillators, and Up & Down Converters”


Agenda

Wed 19th (start – pm 14:00)

ATML/Word Annotation Tool

UUT Description (1671.3)

Test Description (1671.1)

Thurs 20th

Test Description cont… (1671.1)

Test Configuration (1671.4)

Instrument Description (1671.2)

Test Station/Adaptor Description (1671.5/6)

Could we do this as amendment rather than full use?

Friday 21st (am)

User Guide (1671.0) & Web site

TII/TAD Management

TII Operations Manual

Active Members List

14:00 fin

 

 

Regards

Chris Gorringe

IEEE SCC20 TII Co-chair

 

 

Chris Gorringe BSc(Hons); MSc; MIEEE

Lead Technical Consultant

 

CASSIDIAN Test Engineering Services UK

23-25 Cobham Road, Ferndown Industrial Estate

Wimborne, Dorset, UK, BH21 7PE

Direct Line: +44 (0) 1202 868585

Mobile:       +44 (0) 7931 102453

USA DD:     (904) 685 1612

Email: chris.gorringe@xxxxxxxxxxx

www.cassidian.com

www.eads-tes.com

www.newWaveX.com

 

**********************************************************************
IMPORTANT NOTICE from Cassidian Test and Services Limited (an EADS Company)
The information contained within this e-mail and any files attached to this e-mail is private and in addition may include commercially sensitive information. The contents of this e-mail are for the intended recipient only and therefore if you wish to disclose the information contained within this e-mail or attached files, please contact the sender prior to any such disclosure.
If you are not the intended recipient, any disclosure, copying or distribution is prohibited. Please also contact the sender and inform them of the error and delete the e-mail, including any attached files from your system.
**********************************************************************
Cassidian Test and Services Limited. Registered Office: 25,23 Cobham Road, Ferndown Industrial Estate., Wimborne, Dorset BH21 7PE, UK Company No: 4279438