Thanks Carol. I am good with any values that do not conflict. I updated my name in the User column.
May I know what are the next steps? I see the status is pending. Could I directly fill in those assigned numbers in the upcoming 11bn D1.0 (hopefully early next week)?
regards
于健 Ross Jian Yu
Huawei Technologies
发件人: Carol Ansley <carol@xxxxxxxxxx>
发送时间: 2025年8月14日 23:13
收件人: Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>
抄送: Stacey, Robert <robert.stacey@xxxxxxxxx>; Alfred Asterjadhi <aasterja@xxxxxxxxxxxxxxxx>; Kwok Shum Au (Edward) <edward.ks.au@xxxxxxxxxx>; Huang, Po-kai <po-kai.huang@xxxxxxxxx>; STDS-802-11-EDITORS@xxxxxxxxxxxxxxxxx
主题: Re: <ANA> value in the upcoming P802.11bn D1.0
Hi Ross,
Attached please find a sheet with the transactions for your requests. I had to change some of your requested numbers. The ones I changed are highlighted in the spreadsheet to make them easy to spot. The other values were fine. I changed the assigned text slightly to match the other entries (leaving off cross-references, leaving off "frame format"). The actual assigned text is also in the spreadsheet.
If you have any questions, please let me know.
Regards,
Carol
On Thu, Aug 14, 2025 at 4:15 AM Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx> wrote:
Hi Carol,
Please advise on this request. Thanks.
Regards
Ross Jian Yu 于健
Huawei Technologies
发件人: Yujian (Ross Yu)
发送时间: 2025年8月11日 12:36
收件人: Huang, Po-kai <po-kai.huang@xxxxxxxxx>; Carol Ansley <carol@xxxxxxxxxx>
抄送: Stacey, Robert <robert.stacey@xxxxxxxxx>; Alfred Asterjadhi <aasterja@xxxxxxxxxxxxxxxx>; Kwok Shum Au (Edward) <edward.ks.au@xxxxxxxxxx>
主题: 答复: <ANA> value in the upcoming P802.11bn D1.0
Hello again,
I have corrected the request number. Please see this version instead.
regards
于健 Ross Jian Yu
Huawei Technologies
发件人: Yujian (Ross Yu)
发送时间: 2025年8月11日 11:58
收件人: 'Huang, Po-kai' <po-kai.huang@xxxxxxxxx>; Carol Ansley <carol@xxxxxxxxxx>
抄送: Stacey, Robert <robert.stacey@xxxxxxxxx>; Alfred Asterjadhi <aasterja@xxxxxxxxxxxxxxxx>; Kwok Shum Au (Edward) <edward.ks.au@xxxxxxxxxx>
主题: 答复: <ANA> value in the upcoming P802.11bn D1.0
Hi Po-Kai,
I agree with all your comments. Please find the attached updated version.
regards
于健 Ross Jian Yu
Huawei Technologies
发件人: Huang, Po-kai <po-kai.huang@xxxxxxxxx>
发送时间: 2025年8月11日 11:25
收件人: Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>; Carol Ansley <carol@xxxxxxxxxx>
抄送: Stacey, Robert <robert.stacey@xxxxxxxxx>; Alfred Asterjadhi <aasterja@xxxxxxxxxxxxxxxx>; Kwok Shum Au (Edward) <edward.ks.au@xxxxxxxxxx>
主题: RE: <ANA> value in the upcoming P802.11bn D1.0
Hi Ross,
Thanks for checking with me. Two comments.
Comment 1: Is the following a typo of the request? I think 11bn only request MAPC PASN authentication.
Comment 2: 1bi recently requests subelement ID for neighbor report including RSNE, RSNXE, supported rates and extended supported rates. Hence, corresponding requests from 11bn are not needed. The root cause is that different people from one company propose the same thing in two different groups.
11bi allocation
11bn request
Best,
Po-Kai
From: Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>
Sent: Sunday, August 10, 2025 7:06 PM
To: Carol Ansley <carol@xxxxxxxxxx>
Cc: Stacey, Robert <robert.stacey@xxxxxxxxx>; Alfred Asterjadhi <aasterja@xxxxxxxxxxxxxxxx>; Kwok Shum Au (Edward) <edward.ks.au@xxxxxxxxxx>; Huang, Po-kai <po-kai.huang@xxxxxxxxx>
Subject: 答复: <ANA> value in the upcoming P802.11bn D1.0
+Po-Kai, I find .11bi recently has several ANA requests/updates, maybe Po-Kai can help double check.
Hi Carol,
Attached please find the request from 11bn. I have also attached a 11bn draft under preparation, for you to check (please do not forward it).
For Protected Dual of Public Action frame details, I assume I can check the baseline and fill in myself?
Also for Dot11UHRStationConfigEntry, I can decide the value by myself, right?
regards
于健 Ross Jian Yu
Huawei Technologies
发件人: Carol Ansley <carol@xxxxxxxxxx>
发送时间: 2025年8月8日 18:43
收件人: Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>
抄送: 'Stacey, Robert' <robert.stacey@xxxxxxxxx>; Alfred Asterjadhi <aasterja@xxxxxxxxxxxxxxxx>; Kwok Shum Au (Edward) <edward.ks.au@xxxxxxxxxx>
主题: Re: <ANA> value in the upcoming P802.11bn D1.0
Hi Ross,
There’s an ANA request form in the ANA database document: https://mentor.ieee.org/802.11/dcn/11/11-11-0270-79-0000-ana-database.xls, 6th tab, called RequestForm.
Fill it out and send it to me and I will find the values you need. You can also double-check that the tables are ANA controlled in the database doc.
Let me know if you have any more questions.
Regards,
Carol
