Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11-EDITORS] 答复: <ANA> value in the upcoming P802.11bn D1.0

--- This message came from the IEEE 802.11 Editors' Reflector ---

Hi Carol,

 

I find a typo in the sheet. In row 28， column J, it should be Mobile AP, not UHR Capabilities. I checked that my request was correct. This should be a typo when paste into this new sheet.

 

regards

于健 Ross Jian Yu

Huawei Technologies

 

发件人: Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>
发送时间: 2025年8月15日 21:15
收件人: Carol Ansley <carol@xxxxxxxxxx>; STDS-802-11-EDITORS <STDS-802-11-EDITORS@xxxxxxxxxxxxxxxxx>
主题: RE: <ANA> value in the upcoming P802.11bn D1.0

 

Hi Carol,

 

Noted and thanks!


regards
于健 Ross Yu
Huawei

发件人：Carol Ansley <carol@xxxxxxxxxx>

收件人：Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>;STDS-802-11-EDITORS <STDS-802-11-EDITORS@xxxxxxxxxxxxxxxxx>

时 间：2025-08-15 20:48:05

主 题：Re: value in the upcoming P802.11bn D1.0

 

Hi Ross,

Sorry if your name was incorrect, I’ll update it.

 

You can use these values.  They are pending to give other people a chance to comment just in case a conflict has been created.

  

The status will officially be changed the next time the database is published, usually right before a face-to-face meeting.

 

Regards,

Carol

 

From: *** IEEE stds-802-11-editors List *** <STDS-802-11-EDITORS@xxxxxxxxxxxxxxxxx> on behalf of Yujian (Ross Yu) <00001792b51ef4ea-dmarc-request@xxxxxxxxxxxxxxxxx>
Date: Thursday, August 14, 2025 at 8:25 PM
To: STDS-802-11-EDITORS@xxxxxxxxxxxxxxxxx <STDS-802-11-EDITORS@xxxxxxxxxxxxxxxxx>
Subject: [STDS-802-11-EDITORS] 答复: <ANA> value in the upcoming P802.11bn D1.0

--- This message came from the IEEE 802.11 Editors' Reflector ---

Thanks Carol. I am good with any values that do not conflict. I updated my name in  the User column.

 

May I know what are the next steps? I see the status is pending. Could I directly fill in those assigned numbers in the upcoming 11bn D1.0 (hopefully early next week)?

 

regards

于健 Ross Jian Yu

Huawei Technologies

 

发件人: Carol Ansley <carol@xxxxxxxxxx>
发送时间: 2025年8月14日 23:13
收件人: Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>
抄送: Stacey, Robert <robert.stacey@xxxxxxxxx>; Alfred Asterjadhi <aasterja@xxxxxxxxxxxxxxxx>; Kwok Shum Au (Edward) <edward.ks.au@xxxxxxxxxx>; Huang, Po-kai <po-kai.huang@xxxxxxxxx>; STDS-802-11-EDITORS@xxxxxxxxxxxxxxxxx
主题: Re: <ANA> value in the upcoming P802.11bn D1.0

 

Hi Ross,

 

Attached please find a sheet with the transactions for your requests.  I had to change some of your requested numbers.  The ones I changed are highlighted in the spreadsheet to make them easy to spot.  The other values were fine. I changed the assigned text slightly to match the other entries (leaving off cross-references, leaving off "frame format").  The actual assigned text is also in the spreadsheet.

 

If you have any questions, please let me know.

 

Regards,

Carol

 

 

On Thu, Aug 14, 2025 at 4:15 AM Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx> wrote:

Hi Carol,

 

Please advise on this request. Thanks.

 

Regards

Ross Jian Yu 于健

Huawei Technologies

 

发件人: Yujian (Ross Yu)
发送时间: 2025年8月11日 12:36
收件人: Huang, Po-kai <po-kai.huang@xxxxxxxxx>; Carol Ansley <carol@xxxxxxxxxx>
抄送: Stacey, Robert <robert.stacey@xxxxxxxxx>; Alfred Asterjadhi <aasterja@xxxxxxxxxxxxxxxx>; Kwok Shum Au (Edward) <edward.ks.au@xxxxxxxxxx>
主题: 答复: <ANA> value in the upcoming P802.11bn D1.0

 

Hello again,

 

I have corrected the request number. Please see this version instead.

 

regards

于健 Ross Jian Yu

Huawei Technologies

 

发件人: Yujian (Ross Yu)
发送时间: 2025年8月11日 11:58
收件人: 'Huang, Po-kai' <po-kai.huang@xxxxxxxxx>; Carol Ansley <carol@xxxxxxxxxx>
抄送: Stacey, Robert <robert.stacey@xxxxxxxxx>; Alfred Asterjadhi <aasterja@xxxxxxxxxxxxxxxx>; Kwok Shum Au (Edward) <edward.ks.au@xxxxxxxxxx>
主题: 答复: <ANA> value in the upcoming P802.11bn D1.0

 

Hi Po-Kai,

 

I agree with all your comments. Please find the attached updated version.

 

regards

于健 Ross Jian Yu

Huawei Technologies

 

发件人: Huang, Po-kai <po-kai.huang@xxxxxxxxx>
发送时间: 2025年8月11日 11:25
收件人: Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>; Carol Ansley <carol@xxxxxxxxxx>
抄送: Stacey, Robert <robert.stacey@xxxxxxxxx>; Alfred Asterjadhi <aasterja@xxxxxxxxxxxxxxxx>; Kwok Shum Au (Edward) <edward.ks.au@xxxxxxxxxx>
主题: RE: <ANA> value in the upcoming P802.11bn D1.0

 

Hi Ross,

 

                Thanks for checking with me. Two comments.

 

Comment 1: Is the following a typo of the request? I think 11bn only request MAPC PASN authentication.

 

 

Comment 2: 1bi recently requests subelement ID for neighbor report including RSNE, RSNXE, supported rates and extended supported rates. Hence, corresponding requests from 11bn are not needed. The root cause is that different people from one company propose the same thing in two different groups.

 

11bi allocation

 

 

11bn request

 

Best,

Po-Kai

From: Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>
Sent: Sunday, August 10, 2025 7:06 PM
To: Carol Ansley <carol@xxxxxxxxxx>
Cc: Stacey, Robert <robert.stacey@xxxxxxxxx>; Alfred Asterjadhi <aasterja@xxxxxxxxxxxxxxxx>; Kwok Shum Au (Edward) <edward.ks.au@xxxxxxxxxx>; Huang, Po-kai <po-kai.huang@xxxxxxxxx>
Subject: 答复: <ANA> value in the upcoming P802.11bn D1.0

 

+Po-Kai, I find .11bi recently has several ANA requests/updates, maybe Po-Kai can help double check.

 

Hi Carol,

 

Attached please find the request from 11bn. I have also attached a 11bn draft under preparation, for you to check (please do not forward it).

 

For Protected Dual of Public Action frame details, I assume I can check the baseline and fill in myself?

 

Also for Dot11UHRStationConfigEntry, I can decide the value by myself, right?

regards

于健 Ross Jian Yu

Huawei Technologies

 

发件人: Carol Ansley <carol@xxxxxxxxxx>
发送时间: 2025年8月8日 18:43
收件人: Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>
抄送: 'Stacey, Robert' <robert.stacey@xxxxxxxxx>; Alfred Asterjadhi <aasterja@xxxxxxxxxxxxxxxx>; Kwok Shum Au (Edward) <edward.ks.au@xxxxxxxxxx>
主题: Re: <ANA> value in the upcoming P802.11bn D1.0

 

Hi Ross,

 

There’s an ANA request form in the ANA database document: https://mentor.ieee.org/802.11/dcn/11/11-11-0270-79-0000-ana-database.xls, 6th tab, called RequestForm.

Fill it out and send it to me and I will find the values you need. You can also double-check that the tables are ANA controlled in the database doc.

 

Let me know if you have any more questions.

 

Regards,

Carol

 

From: Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>
Date: Friday, August 8, 2025 at 4:27 AM
To: 'Carol Ansley' <carol@xxxxxxxxxx>
Cc: 'Stacey, Robert' <robert.stacey@xxxxxxxxx>, Alfred Asterjadhi <aasterja@xxxxxxxxxxxxxxxx>, Kwok Shum Au (Edward) <edward.ks.au@xxxxxxxxxx>
Subject: <ANA> value in the upcoming P802.11bn D1.0

Hello Carol,

 

There are 43 <ANA> values in the upcoming P802.11bn D1.0. Could I request the corresponding number now? How should I proceed? Could I send you the current draft pdf I have, and you can help add number in the pdf? Please let me know how to proceed. Thanks.

 

regards

于健 Ross Jian Yu

Huawei Technologies

 

To unsubscribe from the STDS-802-11-EDITORS list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-EDITORS&A=1

To unsubscribe from the STDS-802-11-EDITORS list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-EDITORS&A=1