Re: [STDS-802-11-TGBP] : SP request, SFD MAC SP Set #11

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hi Bo,

For SFD MAC SP Set #11, can you please update SP2 to the following?

SP 2

When UL access information is present in the SP Advert frame, only one set of SP parameters shall be configured. In this case, the SP ID is interpreted as the number of configured AMP Service Periods, and all other SP parameters shall be identical for those AMP Service Periods.

Thanks,

Sam

From: Sam Shi <Sam.Shi@xxxxxxxxxxxxxxxx>
Sent: Wednesday, November 12, 2025 5:32 PM
To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx>
Subject: [STDS-802-11-TGBP] : SP request

Hi Bo,

Please add the following new MAC SPs to the agenda. Since they are highly related to MAC SP set #2 (which has been deferred), can you please run these two SPs together with SP set #2?

SP 1:

UL access information may be optionally included in the SP Advert frame.
Note: The UL access information (which is similar to what would be carried in the AMP Trigger frame) is to solicit UL AMP PPDU(s) from one or more 802.11bp clients.
Note: How to indicate the presence of the AMP Trigger related parameters is TBD.

Reference: 11-25/2093r0

SP 2:

When UL access information is present, the SP Advert frame includes SP count, SP Start Time, SP Interval, and SP Minimum Wake Duration. SP count is the number of AMP service period configurations; SP Start Time is the start time of the upcoming AMP Service Period. SP Interval is the time interval between two subsequent service periods of an AMP service period configuration.
Note: The SP Minimum Wake Duration refers to the minimum wake up time defined in Motion #75 (MM-22).

Reference: 11-25/2093r0

Thanks,

Sam

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1