Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: FrameMaker training in July

Jim,  I'm not sure I understand your point.  Are you saying you want a separate room 
so that Tuesday tutorials can still go on in parallel to this session.  If not, I think you 
are better off in the big room where you have the best LCD (hi-Res, hi-lumens), folks 
can spread out as much as they need to, but near the front, the speaker has a platform 
and a good microphone so all can hear well, and if 40 or 50 should show up you're 
still in great shape.  Another thought might be to use the 802.11 room so that all 
could be on their wireless network for easy file transfers and application sharing.  
The last thing you would want, I should think, is to be wedged in a small room for 25.  
Just my 2 cents worth.  :-)  
Thanx,  Buzz
Everett O. (Buzz) Rigsbee
Boeing SSG
PO Box 3707, M/S: 7M-FM
Seattle, WA  98124-2207
ph: (425) 865-2443, fx: (425) 865-6721
> From: 	Jim Carlo[]
> Sent: 	Friday, May 26, 2000 12:08 PM
> To: 	Greg Kohn;
> Cc: 	IEEE802
> Subject: 	FrameMaker training in July
> There has been positive response here. In particular see Howard's note
> below. I believe you have also met with Roger Marks at his interim. We might
> hold the training in a small room set up classroom style , so editors could
> bring their pc's to the training and upload some information and templates
> that the IEEE wants people to use. My guess right now is we schedule this
> from 6:30 - 9:00pm on Tuesday, 11July, but this not be in the big tutorial
> room but rather in a room with about 25 people, so there would be better
> interactions with the editors. Anone serious in being an editor should bring
> FrameMaker to the meeting on their machine (I assume this is possible).
> Comments? I need a volunteer to own this training from the SEC and
> coordinate a little with editors in the Working Groups (not much work needed).
> From Howard Frazier:
> I don't think that you can give a useful tutorial on
> framemaker in an hour and a half.
> However, it might be possible to use a three hour session
> to explain the editorial process, including a brief
> overview of framemaker.
> We did this in the past, and it was helpful.
> Since we have a bunch of new editors coming on board
> for 802.3ae and 802.3af, as well as in other dots,
> it might be worthwhile to hold such a session.
> Howard
> Jim Carlo( Cellular:1-214-693-1776 Voice&Fax:1-214-853-5274
> TI Fellow, Networking Standards at Texas Instruments
> Chair, ISO/IEC JTC1/SC6 Telecom and Info Exchange Between Systems
> Chair, IEEE802 LAN/MAN Standards Committee
> From: Greg Kohn []
> Sent: Tuesday, May 23, 2000 2:31 PM
> To:;
> Cc:
> Subject: FrameMaker training
> Gentlemen,
> At the last Standards Board meeting, during lunch, we discussed the
> possibility of myself and Jennifer Longman, a fellow Project Editor,
> conducting a FrameMaker tutorial while at the July 802 meeting in LaJolla.
> Is this still something you would like us to do?  We would still very much
> like to hold one, but I realize planning the time and the space may be
> difficult at this time.  (Quite honestly it slipped my mind until recent
> interactions we've had with the dot-16 tech editors.)  Perhaps if we've
> missed the boat this time, we'll set something more concrete for November.
> Please let me know.
> Thanks,
> Greg Kohn
> Administrator, Standards Publishing
> IEEE Standards Department
> PH: +1 732 562 3831; FX: +1 732 562 1571
> The Institute of Electrical and Electronics Engineers, Inc.
> 445 Hoes Lane, PO Box 1331, Piscataway, NJ 08855-1331 USA
> IEEE: Networking the World
> * Fostering Technological Innovation
> * Enabling Members' Careers
> * Promoting Community Worldwide>