|Thread Links||Date Links|
|Thread Prev||Thread Next||Thread Index||Date Prev||Date Next||Date Index|
---------- This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.
In reviewing the rules regarding recirculation period for sponsor balloting, I have come some text that is unclear to me.
The IEEE 802 WG P&P States –
11.0 Actions requiring an electronic ballot require comments on changes required to modify the vote to Approve. For a letter ballot on a draft standard to be valid a majority of all the voting members of the Working Group must have responded Approve, Do Not Approve, or Abstain. Comment resolution, recirculations, etc. should be consistent with Sponsor ballot rules and 220.127.116.11 of the IEEE-SA Standards Board Operations Manual (SASB OM).
The response time for a Working Group letter ballot on a draft shall be at least thirty days. However, for recirculation ballots the response time shall be at least fifteen days.
Submission of a draft standard or a revised standard to the Sponsor shall be accompanied by any outstanding negative votes and a statement of why these unresolved negative votes could not be resolved.
Revised drafts approved in subsequent Working Group letter ballot for forwarding to the Sponsor Ballot Group do not require Sponsor approval for forwarding.
However, the IEEE-SA Std Board Manual states –
18.104.22.168 Ballot term Each ballot in the standards balloting process shall close at 23:59 UTC-124 on the closing date specified on the ballot. The length of the ballot and associated recirculations is set by the Sponsor. The initial ballot term shall be at least 30 days in duration. The recirculation ballot term shall be at least 10 days in duration.
When I spoke with David, he believe we have used a minimum of 15 days for Sponsor Ballots, but in light of these rules it is unclear where IEEE 802 has a requirement for a minimum of days for a sponsor ballot recirculation.
Can anyone clarify another rule I may have missed? And what are WG Chairs requiring for Sponsor Ballot Recirculations? Your input would be greatly appreciated.