Thanks Don, we have clarified that what I was
looking for was a "clean" version (not red line) of the patcom-proposed changes
being balloted at the SASB. A clean version of the output
from September 12 is now on the site at http://grouper.ieee.org/groups/pp-dialog/drafting-committee/index.html
The bylaws one there includes the text Rick mentions below
I understand the ballot is underway with a closing
date of October 20. What is the answer to Rick's question how the typo
will be corrected on the ballot document? Does it change any timelines for
the ballot?
----- Original Message -----
Sent: Friday, September 29, 2006 11:48
AM
Subject: Re: [PP-DIALOG] Output documents
from the PatCom meeting
George:
The output
documents from the meeting were posted the day after the meeting and an e-mail
was sent to the PP-DIALOG list. See http://grouper.ieee.org/groups/pp-dialog/email/msg00164.html
The documents are still posted in the "Drafting
Committee" area as was stated in the e-mail above.
***************************************************************************
Don
Wright
don@lexmark.com
f.wright@ieee.org / f.wright@computer.org
Director of
Standards
Lexmark International INCITS
Executive Board Vice-Chair
C14/082-3
IEEE SA Standards Board Past
Chair
740 New Circle Rd
IEEE SASB Patent Committee Chair
Lexington, Ky 40550
Member: IEEE SA Board of
Governors
859-825-4808 (phone) Member:
IEEE CS SAB & W3C AC
603-963-8352 (fax)
Director,
IEEE-ISTO
***************************************************************************
|
| "George Willingmyre"
<gtwassociates@gmail.com>
Sent by: PP-DIALOG@ieee.org
09/29/2006 11:45 AM
|
To:
"Townsend, Richard L, JR \(Rick\)"
<rltownsend@LUCENT.COM>,
<PP-DIALOG@listserv.ieee.org>
cc:
Subject: Re: [PP-DIALOG] Output
documents from the PatCom meeting |
Richard, many of us who are not members of SASB do not have
the text of the Patcom documents being balloted by the SASB.
Please excuse me if I am
wrong about this but I do not recall seeing any update after the SASB
meeting
George T. Willingmyre, P.E.
GTW
Associates
1.301.421.4138
www.gtwassociates.com
----- Original Message -----
From:
Townsend, Richard L, JR (Rick)
To: PP-DIALOG@LISTSERV.IEEE.ORG
Sent: Friday, September 29, 2006 10:57
AM
Subject: Re: [PP-DIALOG] Output documents
from the PatCom meeting
Hi folks,
My
colleagues, in their initial look at the PatCom documents, found what we
believe to be an omission in the definition of 'Reasonable and Good Faith
Inquiry" in the ballot text of Bylaws. The change was made to Hung
Ling’s objection that, without the additional words, the Submitter seems to be
required to ask anyone in the world and it was agreed to include the text in
red below (“who are from, employed by or represent the Submitter and”) in the
Bylaws, page 2.
From the output of the PatCom on
9/12/06:
“Reasonable and Good
Faith Inquiry” includes, b 1 but is not limited to, a Submitter using
2 reasonable efforts to identify and
contact those individuals who are from, employed by or
3 otherwise represent the Submitter and who
are known to the Submitter to be current or past
4 participants in the development process of the
[Proposed] IEEE Standard identified in a Letter of
5 Assurance, including, but not limited to, participation
in a Sponsor-Ballot or Working Group. If
6 the Submitter did not or does not have any
participants, then a Reasonable and Good Faith
7 Inquiry may include, but is not limited to, the
Submitter using reasonable efforts to contact
8 individuals who are from, employed by or represent the Submitter and who the Submitter
9 believes are most likely to have knowledge about the
technology covered by the [Proposed]
10 IEEE Standard.
What’s the process for getting this
text re-inserted?
Rick
-----Original
Message-----
From: stds-patcom@IEEE.ORG
[mailto:stds-patcom@IEEE.ORG]On Behalf Of
don@LEXMARK.COM
Sent: Wednesday, September 13, 2006 2:34
PM
To: stds-patcom@IEEE.ORG; pp-dialog@IEEE.ORG
Cc:
steve_mills@hp.com
Subject: Output documents from the PatCom
meeting
I have updated the PP-Dialog Drafting
Committee web page
(http://grouper.ieee.org/groups/pp-dialog/drafting-committee/index.html) with
the output documents from the September 12th PatCom meeting. Real-time
editing by myself and Dave Ringle were compared to insure all the agreed-to
changes were captured. In addition, I went through the comment database,
comment by comment, to make sure all the agreed-to changes were actually made.
These documents will be delivered to the Standards Board on Friday
with PatCom's recommendation.
***************************************************************************
Don
Wright
don@lexmark.com
f.wright@ieee.org /
f.wright@computer.org
Director of Standards
Lexmark International
INCITS Executive Board Vice-Chair
C14/082-3
IEEE SA Standards Board Past Chair
740 New Circle Rd
IEEE SASB Patent Committee Chair
Lexington, Ky 40550 Member: IEEE
SA Board of Governors
859-825-4808 (phone)
Member: IEEE CS SAB & W3C AC
603-963-8352 (fax)
Director,
IEEE-ISTO
***************************************************************************
|