Re: [PP-DIALOG] Output documents from the PatCom meeting
George,
We have distributed the updated documents to the Standards
Board and cc'ed the Board of Governors. We have identified the specific
corrections made. I do not anticipate this will affect the balloting
period.
***************************************************************************
Don Wright
don@lexmark.com
f.wright@ieee.org / f.wright@computer.org
Director of Standards
Lexmark International INCITS Executive
Board Vice-Chair
C14/082-3
IEEE SA Standards Board Past Chair
740 New Circle Rd IEEE
SASB Patent Committee Chair
Lexington, Ky 40550 Member: IEEE
SA Board of Governors
859-825-4808 (phone) Member: IEEE CS
SAB & W3C AC
603-963-8352 (fax) Director,
IEEE-ISTO
***************************************************************************
|
| "George Willingmyre" <gtwassociates@gmail.com>
09/29/2006 12:53 PM
|
To:
<don@lexmark.com>
cc:
<gilohana@cisco.com>, "Townsend,
Richard L, JR \(Rick\)" <rltownsend@LUCENT.COM>, <PP-DIALOG@listserv.ieee.org>
Subject:
Re: [PP-DIALOG] Output documents from
the PatCom meeting |
Thanks Don, we have clarified that what I
was looking for was a "clean" version (not red line) of the patcom-proposed
changes being balloted at the SASB. A clean version of the output
from September 12 is now on the site at http://grouper.ieee.org/groups/pp-dialog/drafting-committee/index.html
The bylaws one there includes the text Rick mentions below
I understand the ballot is underway with
a closing date of October 20. What is the answer to Rick's question
how the typo will be corrected on the ballot document? Does it change
any timelines for the ballot?
George T. Willingmyre, P.E.
GTW Associates
1.301.421.4138
www.gtwassociates.com
----- Original Message -----
From: don@lexmark.com
To: George
Willingmyre
Cc: PP-DIALOG@listserv.ieee.org
; Townsend,
Richard L, JR (Rick)
Sent: Friday, September 29, 2006 11:48 AM
Subject: Re: [PP-DIALOG] Output documents from
the PatCom meeting
George:
The output documents from the meeting were posted the day after the meeting
and an e-mail was sent to the PP-DIALOG list. See http://grouper.ieee.org/groups/pp-dialog/email/msg00164.html
The documents are still posted in the "Drafting Committee" area
as was stated in the e-mail above.
***************************************************************************
Don Wright
don@lexmark.com
f.wright@ieee.org
/ f.wright@computer.org
Director of Standards
Lexmark International INCITS Executive
Board Vice-Chair
C14/082-3
IEEE SA Standards Board Past Chair
740 New Circle Rd IEEE
SASB Patent Committee Chair
Lexington, Ky 40550 Member: IEEE
SA Board of Governors
859-825-4808 (phone) Member: IEEE CS
SAB & W3C AC
603-963-8352 (fax) Director,
IEEE-ISTO
***************************************************************************
|
| "George Willingmyre"
<gtwassociates@gmail.com>
Sent by: PP-DIALOG@ieee.org
09/29/2006 11:45 AM
|
To: "Townsend,
Richard L, JR \(Rick\)" <rltownsend@LUCENT.COM>, <PP-DIALOG@listserv.ieee.org>
cc:
Subject: Re: [PP-DIALOG]
Output documents from the PatCom meeting |
Richard, many of us who are not members of SASB do not have the text of
the Patcom documents being balloted by the SASB.
Please excuse me if I am wrong about this but I do not recall seeing any
update after the SASB meeting
George T. Willingmyre, P.E.
GTW Associates
1.301.421.4138
www.gtwassociates.com
----- Original Message -----
From: Townsend,
Richard L, JR (Rick)
To: PP-DIALOG@LISTSERV.IEEE.ORG
Sent: Friday, September 29, 2006 10:57 AM
Subject: Re: [PP-DIALOG] Output documents from the PatCom meeting
Hi folks,
My colleagues, in their initial look at the PatCom documents, found what
we believe to be an omission in the definition of 'Reasonable and Good
Faith Inquiry" in the ballot text of Bylaws. The change was
made to Hung Ling’s objection that, without the additional words, the
Submitter seems to be required to ask anyone in the world and it was agreed
to include the text in red below (“who are from, employed by or represent
the Submitter and”) in the Bylaws, page 2.
From the output of the PatCom on 9/12/06:
“Reasonable and Good Faith Inquiry” includes, b 1 but is not limited
to, a Submitter using
2 reasonable efforts to identify and contact those individuals who are
from, employed by or
3 otherwise represent the Submitter and who are known to the Submitter
to be current or past
4 participants in the development process of the [Proposed] IEEE Standard
identified in a Letter of
5 Assurance, including, but not limited to, participation in a Sponsor-Ballot
or Working Group. If
6 the Submitter did not or does not have any participants, then a Reasonable
and Good Faith
7 Inquiry may include, but is not limited to, the Submitter using reasonable
efforts to contact
8 individuals who are from,
employed by or represent the Submitter and who
the Submitter
9 believes are most likely to have knowledge about the technology covered
by the [Proposed]
10 IEEE Standard.
What’s the process for getting this text re-inserted?
Rick
-----Original Message-----
From: stds-patcom@IEEE.ORG [mailto:stds-patcom@IEEE.ORG]On Behalf
Of don@LEXMARK.COM
Sent: Wednesday, September 13, 2006 2:34 PM
To: stds-patcom@IEEE.ORG; pp-dialog@IEEE.ORG
Cc: steve_mills@hp.com
Subject: Output documents from the PatCom meeting
I have updated the PP-Dialog Drafting Committee web page (http://grouper.ieee.org/groups/pp-dialog/drafting-committee/index.html)
with the output documents from the September 12th PatCom meeting. Real-time
editing by myself and Dave Ringle were compared to insure all the agreed-to
changes were captured. In addition, I went through the comment database,
comment by comment, to make sure all the agreed-to changes were actually
made.
These documents will be delivered to the Standards Board on Friday with
PatCom's recommendation.
***************************************************************************
Don Wright
don@lexmark.com
f.wright@ieee.org / f.wright@computer.org
Director of Standards
Lexmark International INCITS Executive
Board Vice-Chair
C14/082-3
IEEE SA Standards Board Past Chair
740 New Circle Rd IEEE
SASB Patent Committee Chair
Lexington, Ky 40550 Member: IEEE
SA Board of Governors
859-825-4808 (phone) Member: IEEE CS
SAB & W3C AC
603-963-8352 (fax) Director,
IEEE-ISTO
***************************************************************************