Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802SEC] PAR Development



Hi Glenn,

As ICCom is responsible for all ICAID's, the ICCom Operations Manual takes precedence over the LAN/MAN Standards Committee P&Ps.  NENDICA can recommend to IEEE 802.1 that a PAR be developed and that the PAR be drafted by the IEEE 802.1 Working Group.

Best regards,
Jodi

Jodi Haasz

Senior Manager,

Operational Program Management

Office: +1 732-562-6367

Mobile: +1 732-439-9144 | standards.ieee.org


      

  




On Fri, Nov 19, 2021 at 3:42 PM Glenn Parsons <glenn.parsons@ericsson.com> wrote:

Thanks Jodi,

 

The question is if the ICCom OpsMan applies to Nendica.

 

I would assert that it does not.  Each ICAID declares whether it uses ICAID P&Ps (which is subordinate to the ICCom OpsMan) or WG & SC P&P (which does not have the ICCom OpsMan in its hierarchy).  Nendica uses the latter (per 7.3 of the ICAID):

https://standards.ieee.org/content/dam/ieee-standards/standards/web/governance/iccom/IC17-001-IE.pdf

 

So Nendica is a subgroup of 802.1 which may be tasked to draft a PAR according to the LMSC P&P.

 

Cheers,

Glenn.

 

From: ***** IEEE 802 Executive Committee List ***** <STDS-802-SEC@listserv.ieee.org> On Behalf Of Jodi Haasz
Sent: Friday, November 19, 2021 3:00 PM
To: STDS-802-SEC@LISTSERV.IEEE.ORG
Subject: [802SEC] PAR Development

 

Dear All:

 

Based on the question that came up today regarding PAR development, please note that the last paragraph of subclause 9.2 of the IEEE SA Industry Connections Committee Operations Manual, states "IC activities shall avoid development of work products that should be undertaken through the IEEE SA PAR/Standards Development process or the ISTO process."

 

Best regards,

Jodi

 

Jodi Haasz

Senior Manager,

Operational Program Management

Office: +1 732-562-6367

Mobile: +1 732-439-9144 | standards.ieee.org

 

      

  


To unsubscribe from the STDS-802-SEC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-SEC&A=1


To unsubscribe from the STDS-802-SEC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-SEC&A=1