This page reflects the current effort on P1450.4 Please refer to the Main Page for an overview of the STIL effort and on-going activities for this effort. The Executive Overview is a good place to understand the intent of this effort.
The Project Authorization Request (PAR) for P1450.4 defines the scope of this part of the STIL project. PAR Extension granted through 31 December 2008. Current PAR granted June 2012, valid through 31 December 2016 Current PAR Extension granted through 31 December 2017
Chair: Jim O’Reilly Vice-chair: Ernie Wahl Working Group: list |
Quick Links: the Main STIL Page Meeting Minutes Current Draft Ballot Document (D06) (pdf) Current Status Previous Draft Ballot Documents (index) Archive docs PAR sub-group Docs for Working Group Meetings Latest Issues/Resolutions List Subscribe to/unsubscribe from email reflector Recommended changes for next revision of standard
Quick Links: Current Draft Ballot Document in various formats PDF Word doc Word doc as .zip fileWord doc as .tar.gz file
Scratchpad
document links for WG meetings:
GuideLines (for draft ballot editing process)
A humorous look at standards, and why
they end up the way they do (or – standards live forever) –
courtesy of Rohit Kapur, Synopsis.
Standards Live Forever (view as slide show for proper effect!)
Sponsor Ballot
Invitation for P1450.4 now open, and will remain open until 25Nov2016 23Dec2016
13Jan2017.
The Sponsor Ballot Invitation to participate in the STIL Test Flow P1450.4 ballot is now open. For details on how to join the ballot group, see page 2 of the ballot invitation here: P1450.4 Sponsor Ballot Invitation. You may also contact the WG chair (Jim O’Reilly) for more information.
Sponsor Ballot Invitation for P1450.4
was closed on 13Jan2017. Balloting
will begin shortly.
Sponsor Ballot began on 23-Feb-2017, and closed on 17-Apr-2017. Initial ballot results are:
·
85%
response rate, 81% approval rate.
·
With
>75% response rate, ballot is valid.
With >75% approval rate, the initial ballot passed, but with some
negative votes with comments.
·
Currently
in negative ballot comment resolution process.
Negative ballot resolution process has been completed, and first
recirculation ballot was opened on Sept. 28, 2017. The recirculation ballot closed on
October 11, 2017. Results of
recirculation ballot #1 are:
·
88%
response rate, 92% approval rate.
·
With
>75% response rate, ballot is valid.
With >75% approval rate, the first recirculation ballot passed, but
with some negative votes with comments.
·
Negative
ballot comment resolution process has been completed (running from Oct. 11,
2017 through Oct. 15, 2017).
Negative ballot resolution process for the first recirculation has
completed (running from Oct. 11, 2017 through Oct. 15, 2017), and the second
recirculation opened on 10/16/2017, and closed on 10/26/2017. Results of recirculation ballot #2 are:
·
91%
response rate, 93% approval rate.
·
With
>75% response rate, ballot is valid.
With >75% approval rate, the second recirculation ballot has
passed. There is one negative
comment, which is a repeat of a previous negative comment. At this point, we have submitted to
RevCom and SASB for approval.
RevCom
and SASB approved P1450.4 as IEEE 1450.4-2017 at their Dec. 5/6, 2017
meetings. The publication process
was completed on Feb. 9, 2018. The
document is now available through IEEE xPlore: IEEE
1450.4-2017
NOTE: Meeting schedule (day) has changed as of
Jan 21, 2014, from Wednesdays to Tuesdays (at the same times)
The P1450.4 Working Group has regularly-scheduled phone conferences, held weekly, on Tuesdays starting at 6 pm Israel time, 5 pm Germany time, 11 am Eastern Time, 9 am Mountain Time, 8 am Pacific Time. These Working Group meetings are open to anyone interested in developing this standard. Contact Jim O'Reilly to participate. The weekly meeting schedule begins on Tuesday, Jan. 21, 2014.
Meeting conference call information: +1 641 715 3827 (US), +49 (0)
631 206 9400 (Germany), +972 76 599
0030 (Israel), Participant Access Code: 238537#
Note: as of Oct. 6, 2015, the US
call-in number has changed. The new
number is listed above. Access code
remains the same.
Online meetings using FreeConferenceCall.com online meeting application:
Download and install application from here: FreeConferenceCall Online Meeting Application Installer
Once application is installed, launch it, and either host a meeting, or join a meeting. To join, use meeting ID jim_oreilly3. To host a meeting, you must sign up for an account at https://www.freeconferencecall.com/, and log in with the email address used to sign up for the account when you and sign up for an account.
For the time being, we’ll continue to use the dial-in number shown above, even though a dial-in number with access code different than that listed above will be shown in the application screen. At some point, we may use the online meeting dial-in number, but for now, we’ll stick with the current number.
As has been the case for other STIL development efforts, the P1450.4 Working Group maintains an email reflector (provided by IEEE). This email address of the P1450.4 reflector is STDS-1450-4@listserv.ieee.org. All official notices go through this email reflector.
To subscribe: Send an email (from the account at which you want to receive the reflector traffic) to listserv@listserv.ieee.org" with the keywords "subscribe stds-1450-4 <firstname> <lastname>" (without quotes and angle brackets) in the body of the message (not the subject line, which can be empty). Once you do that, you'll start receiving email traffic from the reflector.
To unsubscribe: Send an email (from the same account you used to subscribe) to listserv@listserv.ieee.org, with the command "signoff stds-1450-4" (again, no quotes) in the message body (not the subject line, which can be empty).
To send email to the reflector: Send messages to stds-1450-4@listserv.ieee.org. These messages will be delivered to all current subscribers of the reflector.
Name |
Link |
Date Revised |
D00 draft ballot document |
Jan. 13, 2010 |
|
D00 draft ballot document |
Jan. 03, 2010 |
|
D00 draft ballot document |
Dec. 15, 2010 |
|
D00 draft ballot document |
Dec. 8, 2010 |
|
D00 draft ballot document |
Dec. 1, 2010 |
|
D00 draft ballot document |
Oct. 27, 2010 |
|
D00 draft ballot document |
Oct. 13, 2010 |
|
D00 draft ballot document |
Sept. 29, 2010 |
|
D34 documents (syntax and starting to add some explanatory
material) |
P1450.4-D34-072110
(see revision header block for changes) |
July 21, 2010 |
D33 documents (syntax and starting to add some explanatory
material) |
P1450.4-D33-061610
(see revision header block for changes) |
June 16, 2010 |
D32 documents (housekeeping updates – added enum syntax and updated some comments) |
P1450.4-D32-021010 (see revision header block for changes) |
Feb. 10, 2010 |
D31 documents (syntax and starting to add some explanatory
material for newly-added sections) |
P1450.4-D31-012710
(see revision header block for changes) |
Jan. 27, 2010 |
D30 documents (syntax only – starting to add some
explanatory material for newly-added sections) |
P1450.4-D30-010610
(see revision header block for changes) |
Jan. 06, 2010 |
D29 documents (syntax only – starting to add some
explanatory material for newly-added sections) |
P1450.4-D29-120309
(see revision header block for changes) |
Dec. 03, 2009 |
D28 documents (syntax only – no conceptual model
info (yet) ) |
P1450.4-D28-092409
(see revision header block for changes) |
Sept. 24, 2009 |
D27 documents (syntax only – no conceptual model
info (yet) ) |
P1450.4-D27-072209.pdf
(binning syntax updates) P1450.4-D27-071509.pdf
(binning syntax updates) P1450.4-D27-070809.pdf
(binning syntax updates) P1450.4-D27-061609.pdf
(binning syntax updates) |
July 22, 2009 July 15, 2009 July 08, 2009 June 16, 2009 May 26, 2009 May 20, 2009 Mar. 19, 2009 Mar. 11, 2009 |
D27 documents (syntax only – no conceptual model
info (yet) ) |
Mar. 04, 2009 |
|
D27 documents (syntax only – no conceptual model
info (yet) ) |
Dec. 11, 2008 |
|
D26 documents (syntax only – no conceptual model
info (yet) ) |
Oct. 16, 2008 Oct. 09, 2008 Oct. 02, 2008 |
|
D25 documents (syntax only – no conceptual model
info (yet) ) |
Sept. 18, 2008 |
|
D24 documents (syntax only – no conceptual model
info (yet) ) |
Sept. 11, 2008 |
|
D23 documents (syntax only – no conceptual model
info (yet) ) |
Aug. 20, 2008 |
|
D22 documents (syntax only – no conceptual model
info (yet) ) |
July 8, 2008 |
|
D21 documents (syntax only – no conceptual model
info (yet) ) |
May 23, 2008 |
|
D20 documents (syntax only – no conceptual model
info (yet) ) |
May 22, 2008 |
|
D19 documents (syntax only – no conceptual model
info (yet) ) |
May 15, 2008 |
|
D18 documents (syntax only – no conceptual model
info (yet) ) |
Feb. 21, 2008 |
|
D17 documents (integrated syntax and conceptual model) |
Nov 15, 2006 Jan 8, 2007 |
|
D16 documents (defines binning) conceptual model vs. syntax |
Apr 4, 2006 Mar 1, 2006 Feb 28, 2006 Jan 5, 2006 |
|
D15 documents (defines the variables, parameters, and sequencing issues) |
Oct 31, 2005 |
|
D14 documents (defines the main structural blocks of the flow language) |
Aug 22, 2005 |
|
Open Star Test Language (from STC) |
Feb 23, 2005 Mar 15, 2005 |
|
Conceptual models |
- - Feb 14, 2005 Sep 28, 2005 |
|
Draft D13D documents |
Nov 11, 2004 |
|
Draft D11 documents |
Sep 22, 2004 |
|
Stylus example from Inovys |
Sep 22, 2004 |
|
Conceptual models |
Mar 3, 2004 Mar10, 2004 May 12, 2004 May 19, 2004 |
|
--- |
--- |
--- |
Stylus submission from Inovys |
Feb 2002 |
|
Early glossary work by Ernie Wahl |
Feb/Apr 2002 |
|
Early requirements discussions: |
Feb 2002 |
|
Start of language discussions |
March 8,1999 |
|
List of test methods |
March 8,1999 |
|
'98 diagrams |
1998 |
Maintained by
Jim O’Reilly